Standard drills
Products> Drilling
Drills type MU42S with steel shank and special undertcut design and semi-single-helix helis. They are available from 0.10 mm to 0.45 mm in diameter. They are particularly suitable for filler materials. The number of perforated panels or the tool life can be increased.
The UX42 type drills are drills with hard metal flute and steel shank with a diameter of 3.175 mm. The helix is udercut type and with a helical angle of 42 degrees. They are available from a diameter of 0.15 to 0.5 mm. They are particularly suitable for drilling multilayers with filled material and with high Tg, they are distinguished by good chip removal, a very low breakage percentage and very low deviation values.
The UX30 type drills are drills with hard metal flute and steel shank with a diameter of 3.175 mm. The helix is undercut and with a helical angle of 30 degrees. They are available from 0.85 to 2.00 mm in diameter. They are particularly suitable for drilling multilayers with high Tg, they are distinguished by a very low breakage percentage and by very low deviation values.
The SX35 type drills are drills with hard metal flute and steel shank with a diameter of 3.175 mm. The helix is of the standard type and with a helical angle of 35 degrees. They are available from 0.10 to 0.80 mm in diameter. They are particularly suitable for drilling multilayers with high Tg, they are distinguished by a very low breakage percentage and by very low deviation values
The SD-type drills are drills made entirely of solid carbide with a shank diameter of 3,175 mm. They are available from a diameter of 3.00 mm to 6.50 mm. They are suitable for standard PCBs
The LD LX type drills are drills for slots, available from a diameter of 0.50 to 2.00 mm
SP30C drills are drills for blind hole drilling and available in six diameters. The helicoid is conical in shape.
