Standard drills
Drill type MU42S with steel shank and special undercut design and semi-single helix helix. They are available in diameters from 0.10 mm to 0.45 mm. They are particularly suitable for filler materials. The number of holes or tool life can be increased.
Type UX42 drills are carbide fluted drills with a steel shank of 3.175 mm diameter. The helix is undercut and has a helix angle of 42 degrees. They are available in diameters from 0.15 to 0.5 mm. They are particularly suitable for multilayer drilling with filled material and high Tg, with good chip evacuation, a very low breakage rate and very low deviation values.
The UX30 drills are carbide fluted drills with a steel shank of 3.175 mm diameter. The helix is undercut and has a helix angle of 30 degrees. They are available in diameters from 0.85 to 2.00 mm. They are particularly suitable for drilling high Tg multilayer materials and have a very low breakage rate and very low drift.
The SX35 drills are carbide fluted drills with a steel shank of 3.175 mm diameter. The helix is standard type with a helix angle of 35 degrees. They are available in diameters from 0.10 to 0.80 mm. They are particularly suitable for drilling high Tg multilayer materials and have a very low breakage rate and very low drift.
SD drills are all solid carbide drills with a shank diameter of 3.175 mm. They are available in diameters from 3.00mm to 6.50mm. They are suitable for standard PCBs.
LD LX drills are slot drills available in diameters from 0.50mm to 2.00mm.
SP30C drills are blind hole drills and are available in six diameters. The helix is tapered.
